When low water pressure slows you down, this Multi Stage High Pressure Water Pump offers the perfect solution for constant, on-demand water flow. Ideal for homes, gardens, farms, and commercial use, this pump provides pressurised water whenever and wherever needed. Built with an IP-rated commercial motor and a full stainless steel body, it’s designed for durability, with cast iron ends, corrosion-resistant brass connectors, and an efficient cooling system. The 2500W motor pumps an impressive 9000L/hr with a 64m head, effortlessly delivering water up to two stories high. One-inch inlet and outlet ports make connections simple, while the built-in thermal protection prevents damage from running dry. With adjustable pressure control and an easy-to-read gauge, maintaining your desired water pressure is seamless. Just plug it into any 240V socket, and you’re set for reliable water supply, whether for temporary tasks or permanent installations.
- Powerful 2500W motor provides high water flow and performance
- Self-priming pump ideal for fast water draw from tanks and wells
- Multi-stage design improves efficiency and flow consistency
- Suitable for garden, farm, and home water supply systems
- 100% duty cycle supports continuous, uninterrupted operation
- Stainless steel body resists rust, extending pump lifespan
- Cast iron ends add durability to handle rugged conditions
- Automatic on/off controller for hassle-free operation
- 64m head height provides water delivery above two stories
- Anti-corrosive alloy motor housing protects against damage
- Ceramic and carbon seals prevent leaks and wear
- Built-in thermal protection guards the motor from overheating
- Efficient cooling system maintains optimal temperature
- Conductive copper motor lowers heat for long-lasting use
- Brass connector resists corrosion for reliable connections
- Leak-proof rubber ring provides a secure seal
- Easy plug-and-play design for quick installation
- Fully automatic pressure control for consistent output
- Australian-standard cable and plug guarantee compliance
- Pump:
- Maximum Power: 2500W / 3.5HP
- Maximum Flow: 150L/min, 9,000L/hr
- Maximum Head: 64m
- Stage: 5 stages
- Plug & Cord: SAA 250V/10A *0.6m
- Brass connector: 1"
- Inlet/outlet: 1"
- Casing: stainless steel
- Motor: Copper wire
- Protection class: IP44
- Mechanical Seal: Ceramic/ Carbon
- Pump weight: 15.5kg
- Controller:
- Voltage: 220/240V
- Frequency: 50/60Hz
- Maximum current: 10A
- Maximum water temperature: 60 degrees
- Maximum working bar pressure: 10 bar
- Protection grade: IP65
- Inlet and outlet size: 1" (25mm)
- Dimensions: 22 x 12.4 x 17cm
- Colour: Yellow
- Controller weight: 1.5kg
12 Month Limited Warranty
- 2500W Multi Stage High Pressure Rain Water Tank Pump Electric Garden Irrigation
- Powerful 2500W motor provides high water flow and performance
- Self-priming pump ideal for fast water draw from tanks and wells
- Multi-stage design improves efficiency and flow consistency
- Suitable for garden, farm, and home water supply systems
- 100% duty cycle supports continuous, uninterrupted operation
- Stainless steel body resists rust, extending pump lifespan
- Cast iron ends add durability to handle rugged conditions
- Automatic on/off controller for hassle-free operation
- 64m head height provides water delivery above two stories
- Anti-corrosive alloy motor housing protects against damage
- Ceramic and carbon seals prevent leaks and wear
- Built-in thermal protection guards the motor from overheating
- Efficient cooling system maintains optimal temperature
- Conductive copper motor lowers heat for long-lasting use
- Brass connector resists corrosion for reliable connections
- Leak-proof rubber ring provides a secure seal
- Easy plug-and-play design for quick installation
- Fully automatic pressure control for consistent output
- Australian-standard cable and plug guarantee compliance
- Pump:
- Maximum Power: 2500W / 3.5HP
- Maximum Flow: 150L/min, 9,000L/hr
- Maximum Head: 64m
- Stage: 5 stages
- Plug & Cord: SAA 250V/10A *0.6m
- Brass connector: 1"
- Inlet/outlet: 1"
- Casing: stainless steel
- Motor: Copper wire
- Protection class: IP44
- Mechanical Seal: Ceramic/ Carbon
- Pump weight: 15.5kg
- Controller:
- Voltage: 220/240V
- Frequency: 50/60Hz
- Maximum current: 10A
- Maximum water temperature: 60 degrees
- Maximum working bar pressure: 10 bar
- Protection grade: IP65
- Inlet and outlet size: 1" (25mm)
- Dimensions: 22 x 12.4 x 17cm
- Colour: Yellow
- Controller weight: 1.5kg
SKU | AP-PUMP-ST5-25-OG-YEL |
Colour | Yellow |
Shipping Weight | 18.0000kg |
Product Weight | 18.5000kg |
Shipping Width | 0.220m |
Shipping Height | 0.343m |
Shipping Length | 0.495m |
Shipping Cubic | 0.037000000m3 |
Assembled Length | 0.305m |
Assembled Height | 0.310m |
Assembled Width | 0.135m |
Type | Water Pump High Pressure |
Help other users shop smarter by writing reviews for products you have purchased.