This 2.8HP Multi Stage Water Pump High Pressure Household Garden Home Water Tank Pump is perfect for building a pressurized water supply and providing home and irrigation applications. This multi-stage, high-pressure fuel pump is designed for permanent installation and is ideal for toilet fill-up, washing machines, dishwashers, kitchen taps, showers, irrigation systems and watering your home garden. This multi-stage and self-priming water pump is built to pump through all seasons giving you peace of mind continuously. You can effortlessly adjust the pressure as needed and the pressure gauge will allow you to monitor the flow. You won't need to worry about overheating even when using this High-Pressure Water Pump for long because its cooling system is highly efficient. Rainwater will now be delivered straight to your toilets and kitchen taps with the help of this High-Pressure Water pump so you'll be saving energy and resources.
- Powerful 2000W self-priming multi-stage pump
- High-pressure water source for household and garden
- 100% duty cycle - designed for continuous operation
- Rust-resistant stainless steel pump body
- Durable cast iron ends keep the body longer-lasting
- Fully automatic operation on/off controller
- Huge 51m head
- Anti-corrosive alloy motor housing
- Ceramic and carbon seals protect the water pump from all conditions
- Built-in thermal protection prevents the motor from burning out
- An efficient cooling system prevents the motor from overheating
- The highly conductive copper motor generates low heat efficiently
- Corrosion-resistant brass connector
- Leak-proof rubber ring
- Easy connecting plug and cable attaches the pump effortlessly
- Fully automatic pressure controller
- A precise pressure gauge helps to monitor a handy
- Adjustable start-up pressure controls the flow of water per use
- Delivers rainwater straight to your toilets and kitchen taps
- Maximizes water resources
- Perfect for Garden irrigation, farm irrigation & home water supply
- Australian standard cable and plug
- Pump:
- Maximum Power: 2000W / 2.8HP
- Maximum Flow: 120L/min, 7200L/hr
- Maximum Head: 51m
- Stage: 4 stages
- Plug & Cord: SAA 250V/10A *0.6m
- Brass connector: 1"
- Inlet/outlet: 1"
- Casing: stainless steel
- Motor: Copper wire
- Protection class: IP44
- Mechanical Seal: Ceramic/ Carbon
- Controller:
- Voltage: 220/240V
- Frequency: 50/60Hz
- Maximum. current: 10A
- Maximum. water temperature: 60 degrees
- Starting pressure: 1.5-3 bar
- Maximum. pressure for use: 10 bar
- Protection grade: IP65
- Inlet and outlet size: 1"(25mm)
- Dimensions: 22 x 15 x 15cm
- Weight: 1.5kg
12 Month Limited Warranty
- 2.8HP Multi Stage Water Pump High Pressure Household Garden Home Water Tank Pump
- Powerful 2000W self-priming multi-stage pump
- High-pressure water source for household and garden
- 100% duty cycle - designed for continuous operation
- Rust-resistant stainless steel pump body
- Durable cast iron ends keep the body longer-lasting
- Fully automatic operation on/off controller
- Huge 51m head
- Anti-corrosive alloy motor housing
- Ceramic and carbon seals protect the water pump from all conditions
- Built-in thermal protection prevents the motor from burning out
- An efficient cooling system prevents the motor from overheating
- The highly conductive copper motor generates low heat efficiently
- Corrosion-resistant brass connector
- Leak-proof rubber ring
- Easy connecting plug and cable attaches the pump effortlessly
- Fully automatic pressure controller
- A precise pressure gauge helps to monitor a handy
- Adjustable start-up pressure controls the flow of water per use
- Delivers rainwater straight to your toilets and kitchen taps
- Maximizes water resources
- Perfect for Garden irrigation, farm irrigation & home water supply
- Australian standard cable and plug
- Pump:
- Maximum Power: 2000W / 2.8HP
- Maximum Flow: 120L/min, 7200L/hr
- Maximum Head: 51m
- Stage: 4 stages
- Plug & Cord: SAA 250V/10A *0.6m
- Brass connector: 1"
- Inlet/outlet: 1"
- Casing: stainless steel
- Motor: Copper wire
- Protection class: IP44
- Mechanical Seal: Ceramic/ Carbon
- Controller:
- Voltage: 220/240V
- Frequency: 50/60Hz
- Maximum. current: 10A
- Maximum. water temperature: 60 degrees
- Starting pressure: 1.5-3 bar
- Maximum. pressure for use: 10 bar
- Protection grade: IP65
- Inlet and outlet size: 1"(25mm)
- Dimensions: 22 x 15 x 15cm
- Weight: 1.5kg
Delivery excludes the following postcodes:
885, 2222, 2449, 2818, 2827, 2829, 2836, 2839, 2874, 2898, 3724, 4477
4490, 4626, 4822, 4871, 4875, 6044, 6209, 6224, 6290, 6442, 6536, 6562
6707, 6713, 6725, 6728, 6743, 6751, 6753, 6754, 7255, 7256, 7258, 7260
SKU | AP-PUMP-ST4-20-OG-TPC |
Colour | Black |
Shipping Weight | 18.0000kg |
Product Weight | 16kg |
Shipping Width | 0.220m |
Shipping Height | 0.330m |
Shipping Length | 0.460m |
Shipping Cubic | 0.033000000m3 |
Assembled Length | 0.440m |
Assembled Height | 0.430m |
Assembled Width | 0.150m |
Type | Pressure Booster Pump |
Help other users shop smarter by writing reviews for products you have purchased.